Abstract
Biomass gasification is a very efficient process to produce clean energy in the form of a fuel gas (syngas). Hazelnut shells and poplar have good energy production potential and they are abundant in nature. Hazelnut shells have the characteristics of a very good fuel and poplar is among the fastest growing trees; furthermore, poplar demonstrated the capability to absorb organic contaminants (i.e. heavy metals) from the soil in which they are cultivated. However, poplar is not usually used for biomass gasification and its potential is not fully assessed. Here, 3 types of biomass, hazelnut shells (HS), simple poplar (P) and poplar coming from a phytoremediation procedure (PHYP), were chosen as representative samples to be characterized and tested in a steam gasification process carried out on a bench scale fluidized bed gasifier. A comparison is reported on gasification results, such as gas composition, tar production and gas yield for the biomass feedstocks mentioned above. It was concluded that hazelnut shells and poplar (P and PHYP) could be easily gasified in a fluidized bed gasifier, thus producing a good quality gas with low polluting by-products. The PHYP sample showed lower tar content and higher gas yield. It is guessed that Ca and Mg, found in higher quantities in the PHYP sample, could have had a catalytic effect in tar reforming thus producing lower quantity of heavy hydrocarbons.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call