Abstract
AbstractIn the present work, the tribological as well as thermo‐mechanical properties of glass‐filled and carbon‐filled PTFE composites are investigated. Solid lubricants like molybdenum disulfide (MoS2) and graphite are also incorporated in such composites in order to achieve better friction and wear properties. When compared to virgin PTFE, both carbon‐filled PTFE and glass‐filled PTFE composites showed the lowest wear rate. Again, the specific wear rate of glass‐filled PTFE composite was lower as compared to carbon‐filled PTFE composite sample under all test speed. A novel combination of a reinforcing filler (glass fibers) and a solid lubricant (MoS2) incorporated PTFE composite sample [PTFE (90 wt%) + glass fibers (5 wt%) + MoS2(5 wt%)] exhibited the lowest wear rate of the order of 10−9 mm3/Nm which was reduced to around 100‐fold as compared to virgin PTFE under sliding speed of 6.28 m/s. The wear rate was reduced due to the reinforcement of fibers but fibers support the load preferentially, whereas MoS2 and graphite offers a good lubricating effect. The morphological, thermo‐physical and thermo‐mechanical characterization of such composite materials were also carried out using various techniques such as SEM, TGA, DSC, TMA, and DMTA. Such PTFE composites having very good thermo‐mechanical as well as tribological properties have potential to be used as seals, gears, bearings etc. in dynamic aerospace applications.Highlights This investigation relates to the PTFE composites to obtain good thermo‐mechanical as well as tribological properties Incorporation of a novel combination of glass fibers and MoS2 exhibited lowest wear rate of the order of 10−9 mm3/Nm The wear property was around 100‐fold lower as compared to virgin PTFE. Such PTFE composites could be used as seals, gears, bearings etc. in dynamic aerospace applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
