Abstract
ABSTRACTNanocomposites of polypropylene and organophilic clay are produced by in situ functionalization of PP with n‐butyl acrylate (BA) during melt mixing. Three strategies for incorporating materials into the mixer are analyzed and the effect of clay concentration is evaluated. The materials are examined by FTIR spectroscopy, X‐ray diffraction, scanning electron microscopy, differential scanning calorimetry, thermogravimetry, and rotational rheometry. The results show that all composites prepared in the presence of BA have similar intercalated clay structure, and that the largest degree of exfoliation is obtained using the sequential mixing technique. This method, which consists in adding the initiator and functionalizing agent to the molten polypropylene followed by the addition of the clay, also produces the largest reduction in molecular weight of the polymer and the largest increase of the elastic modulus. All polymers show similar crystallization and degradation processes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42585.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have