Polymorphic microstructure of MDI/BD-block polyurethane as determined by temperature-sensitive conformation variation.

Abstract

MDI/BD-block thermoplastic polyurethanes (TPUs) crystallized at different isothermal temperatures and different cooling rates were investigated using multiple techniques. The MDI/BD blocks crystallized in form II when the isothermal temperature was equal to or higher than 150 °C, and in form I at lower isothermal temperatures. Form II had a higher crystal elastic modulus of 6.75 GPa than form I of 1.31 GPa. Form I exhibited contracted conformation, while form II exhibited an extended conformation when viewed from the length of the c-axis in the crystalline state. Based on an analysis of the second derivative in FTIR spectroscopy and simple modeling, the conformation differences were considered to stem from the urethane group's internal bond rotation concerning the phenyl ring and the opening bond angle of phenyl-CH2-phenyl. The generation of form II above 150 °C may be due to the activation of urethane and the flexible methylene elevated by the high temperature. Overall, it was seen that the crystallization of MDI/BD blocks involved a physicochemical change.