Polymeric calcium phosphate cements: setting reaction modifiers

Abstract

In this study, the effects of several additives on the setting behavior and mechanical properties of polymeric calcium phosphate cements were investigated. The cements were derived from a polycarboxylic acid (PCA) and a calcium phosphate cement (CPC) powder that consisted of equimolar amounts of tetracalcium phosphate (TTCP) and dicalcium phosphate (DCPA). Retardation of the setting reaction in the PCA-CPC cements was observed by adding tribasic sodium phosphate and fluorides such as stannous fluoride, zirconium(IV) fluoride and titanium(IV) fluoride. It was found that increasing the concentration of these additives decreased the mechanical strength of the cements. However, improvements in both setting and mechanical properties for the PCA-CPC cements were observed by the combined use of 8% (w/w) stanous fluoride and 10% (w/w) tartaric acid. The mechanical properties of the PCA-CPC cement also were improved by adding calcium acetate, calcium methacrylate, zirconium(IV) sulfate and phosphonoacetic acid.