Abstract
Polymers have been applied successfully in fields such as adhesion, biomaterials, protective coatings, friction and wear, composites, microelectronic devices, and thin-film technology. In general, special surface properties with regard to chemical composition, hydrophilicity, roughness, crystallinity, conductivity, lubricity, and cross-linking density are required for the success of these applications. Polymers very often do not possess the surface properties needed for these applications. However, they have excellent bulk physical and chemical properties, are inexpensive, and are easy to process. For these reasons, surface modification techniques which can transform these inexpensive materials into highly valuable finished products have become an important part of the plastics and many other industries. In recent years, many advances have been made in developing surface treatments to alter the chemical and physical properties of polymer surfaces without affecting bulk properties. Common surface modification techniques include treatments by flame, corona, plasmas, photons, electron beams, ion beams, X-rays, and γ-rays. Plasma treatment is probably the most versatile surface treatment technique. Different types of gases such as argon, oxygen, nitrogen, fluorine, carbon dioxide, and water can produce the unique surface properties required by various applications. For example, oxygen-plasma treatment can increase the surface energy of polymers, whereas fluorine-plasma treatment can decrease the surface energy and improve the chemical inertness. Cross-linking at a polymer surface can be introduced by an inert-gas plasma. Modification by plasma treatment is usually confined to the top several hundred ångströms and does not affect the bulk properties. The main disadvantage of this technique is that it requires a vacuum system, which increases the cost of operation. Thin polymer films with unique chemical and physical properties are produced by plasma polymerization. This technology is still in its infancy, and the plasma chemical process is not fully understood. The films are prepared by vapor phase deposition and can be formed on practically any substrate with good adhesion between the film and the substrate. These films, which are usually highly cross-linked and pinhole-free, have very good barrier properties. Such films find great potential in biomaterial applications and in the microelectronics industry. Very high-power microwave-driven mercury lamps are available, and they are used in UV-hardening of photoresist patterns for image stabilization at high temperatures. Other applications of UV irradiation include surface photo-oxidation, increase of hydrophilicity, and photocuring of paintings. Pulsed UV-lasers are used in surface modification in many areas. Pulsed UV-laser irradiation can produce submicron periodic linear and dot patterns on polymer surfaces without photomask. These interference patterns can be used to increase surface roughness of inert polymers for improved adhesion. These images can also be transferred to silicon surfaces by reactive ion etching. Pulsed laser beams can be applied to inert polymer surfaces for increased hydrophilicity and wettability. Polymer surfaces treated by pulsed UV-laser irradiation can be positively or negatively charged to enhance chemical reactivity and processability. Pulsed UV-laser exposures with high fluence give rise to photoablation with a clean wall profile. There are many other practical applications of laser photoablation, including via-hole fabrication, and diamond-film deposition. The present review discusses all these current applications, especially in the biomedical and microelectronics areas.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call