Abstract

An acrylic plastic spherical pressure hull incorporating polycarbonate inserts for mounting of penetrators has been built and pressure tested. The transparent hull will serve as one atmosphere cockpit in Johnson-Sea-Link #3 submersible for 2500 ft. service. Tests have been conducted with model scale polycarbonate inserts in acrylic plastic spherical pressure hulls and windows to evaluate the structural integrity and cyclic fatigue life of polycarbonate plastic inserts and acrylic shells in which they are mounted under repeated hydrostatic pressurizations. Test results indicate that the short term, long term and cyclic fatigue life of a polycarbonate insert, serving as a bulkhead for electric or hydraulic penetrators in spherical acrylic plastic pressure hulls or windows, exceeds that of the acrylic plastic shell in which it is mounted. Structural parameters of polycarbonate inserts are discussed and design criteria formulated for their utilization in manned submersibles and pressure vessels for human occupancy. Particular emphasis is placed on selection of material, seal configuration, and retainment design.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call