Abstract
A new experimental technique, the resistance probe, was used to study the plasma edge in the PLT and PDX tokamaks. This technique involves measuring the change in resistance of a thin carbon film due to bombardment by energetic particles escaping the plasma. The probes have been calibrated by measuring the resistance change caused by implantation of various ions at different energies. A model has been developed which can be used to determine the flux and energy of the incident particles from the measured resistance changes. For probes exposed in PDX and PLT near the wall, resistance changes were observed due to charge exchange neutrals. Larger changes were observed in the ion scrape-off region closer to the plasma. In PLT the effect of ions at the plasma edge begins to dominate the neutral flux near the radius of the ring limiter. The energy of ions at the plasma edge was estimated to be low (≲100 eV) in PDX during neutral beam-heated discharges, but higher (≳300 eV) in PLT during ion cyclotron resonance heating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
