Abstract
Magnesium (Mg) and its alloys are widely used for biodegradable implant materials due to their degradability and mechanical properties similar to bone. However, the high corrosion rate and release of hydrogen gas hinder its clinical application. In this study, plasma-polymerization was used to deposit the hexamethyldisiloxane (HMDSO) polymeric films on Mg surface using low temperature radio frequency discharge plasma. The chemical and physical properties of the HMDSO films were characterized by contact angle measurements, field emission scanning electron microscope, and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Contact angle results show that the contact angle and the plasma discharge powers are strongly correlated. ATR-FTIR results indicate that plasma-polymerized HMDSO films have a chemical structure close to polydimethylsiloxane (PDMS). The weight loss test and electrochemical impedance spectroscopy were performed immersion in 0.9% NaCl solution in order to investigate corrosion protective properties of the coating layer. It was found that HMDSO plasma-polymerized coating layer showed good anti-corrosion properties than that of untreated samples. These results that the polymeric films coated on Mg may be potentially applied for clinical use.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
