Abstract
This paper deals with elliptical split ring resonator (ESRR) loaded CPW-fed ultra wideband (UWB) printed monopole antenna (PMA) with dual band-notching at 5.2 and 6.9 GHz to notch WLAN and C-band wireless applications, respectively. The antenna is fabricated on duroid dielectric substrate with thickness of 1.6 mm and e r = 2.2. The antenna uses two ESRR with different dimensions to create dual band-notched characteristics. Details of the proposed antenna are presented along with simulated results. The effect of ESRR dimensions and position is examined. The ESRR is also rotated and the effect of this rotation in the notch frequency is also examined. Radiation patterns are simulated by HFSS and omnidirectional radiation patterns in the H -plane could be observed. The group delay is nearly stable in the UWB frequency range, except at the notch frequencies, which is distorted sharply. So, the proposed antenna is a good candidate for the modern UWB systems. Finite element method (FEM) and finite integration technique (FIT) are used to simulate the proposed structures through the usage of HFSS and CST. A very good agreement between both results has been obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
