Abstract

The influence of the chord-to-thickness ratio ( c/t) on the spatial characteristics of the separated shear layer over a blunt plate and the leading-edge vortices embedded in the separated shear layer was studied extensively using planar particle image velocimetry (PIV). Three systems corresponding to different shedding modes were chosen for the comparative study: c/t=3, 6 and 9. The Reynolds number based on the plate's thickness ( t) was Re t= 1×10 3. A gigapixel CCD camera was used to acquire images with a spatial resolution of 0.06 t×0.06 t in the measurement range of 9.5 t×4.5 t. Distributions of statistical quantities, such as the streamline pattern, streamwise velocity fluctuation intensity, shear stress and reverse flow intermittency, showed that the separated shear layer in the system with c/t=3 did not reattach to the plate's surface, while the near‐wake behind the trailing edge was highly unstable because the energetic leading-edge vortices were shed into the wake. The separated shear layer of the system with c/t=6 periodically reattached to the plate's surface, which resulted in intensified fluctuations of the near wake behind the trailing edge. In the longest system ( c/t=9), the separated shear layer always reattached to the plate's surface far upstream from the trailing edge, which did not induce large fluctuations of the near wake. Furthermore, the proper orthogonal decomposition (POD) was extensively employed to filter the original velocity fields spatially to identify the large-scale vortices immersed in the separated shear layer easily. The distribution of the v-v correlation coefficients of the spatially filtered flow fields reflected the organized large-scale vortices in the three systems. The number of alternations of the positive and negative correlation coefficients across the flow field were determined to be 1, 2 and 3 for the systems with c/t=3, 6 and 9, respectively; this is in agreement with the shedding mode of each system. The distribution of the swirling strength of the separated shear layer accurately determined the positions and structures of the large-scale vortices formed above the plate surface.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call