Pitot probe response for pulsed supersonic gas flow characterization in beam profile monitor.

Abstract

For beam profile measurement of high-intensity proton beams in the low-energy high-intensity proton accelerator at Bhabha Atomic Research Centre, a recent noninvasive technique based on gas sheets will be explored. The gas sheet for this instrument needs to be characterized for calibration and fine tuning of the sheet properties to provide better profile measurements. Pulsed sheet generators for similar applications have been characterized using movable vacuum chambers with a small slit and a gauge mounted inside. Pitot probes are more compact instruments and have been used to measure gas jet profiles in molecular beam applications where the jet was not pulsed. The performance of Pitot probes in the measurement of pulsed supersonic gas flow in vacuum was, therefore, investigated in this work. A test system was developed to generate a pulsed supersonic gas jet in vacuum, and a Pitot probe was inserted into the flow at various axial locations with respect to the nozzle. Measurements taken along the nozzle axis using this probe, as well as the axial Mach number and impact pressure computed using computational fluid dynamics and direct simulation Monte Carlo algorithms, were compared with fitting formulas. Schlieren images of the jet with and without the Pitot tube were also taken under different vacuum conditions.