Pilot Studies of Concrete Beams Deformability Reinforced with Composite Reinforcement

Abstract

Purpose of research. Analysis is done on the basis of experimental data of loading level impact on deformability of beams with steel and composite fiberglass reinforcement at prolonged loads.Methods. Experimental studies of concrete bending elements of two series were carried out: the first is reinforced with composite fiberglass reinforcement of ASK class, the second is reinforced with steel reinforcement of А400 class. Studies of experimental samples were carried out under long-term loads. The structures were under different loads during the experiment: at design load, at 1.2 level from design load and at 1.5 from the design load. Concrete deformations and deflections of experimental beams of two series were fixed.Results. Dependence on time of concrete deformations of experimental samples of two series at different loading levels, dependence of deflection growth on load application level, influence dependence of loading level of elements on speed and intensity of creep deformation growth of beams with fiberglass and steel reinforcement are stated on the basis of experimental data. In particular, the bends of all samples with fiberglass reinforcement exceeded the maximum permissible value, while the maximum deflection of reinforced concrete beams in the middle of the section did not exceed maximum permissible value.Conclusion. On the basis of the obtained data, conclusions are drawn on the nature and magnitude of long-term deformations of beams with fiberglass and steel reinforcement at different levels of long-term loads. This conclusion is significant in practical sense when using concrete structures with composite reinforcement taking into account a small number of research data.