Abstract
In this study, we investigated the piezoelectric characteristics of the sol-gel Pb(Zr0.52Ti0.48)O3 (PZT) films deposited on two different types of substrates. Epitaxial PZT piezoelectric thin films were grown on ZrO2-buffered Si substrates, while polycrystalline PZT thin films were grown on conventional Pt/Ti/Si substrates by the sol–gel method. X-ray diffraction measurements revealed a cube-on-cube epitaxy on the buffered Si substrate. The piezoelectric coefficient (e31,f) of the epitaxial PZT thin films was investigated by measuring the tip displacement of PZT cantilevers, and the |e31,f | values were in the range of 8.9–12 C/m2. The voltage dependence of the |e31,f | values was more constant than that of the polycrystalline sol–gel PZT/Si cantilever. The epitaxial sol–gel PZT films thus exhibited good piezoelectric properties for applications in microelectromechanical systems devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
