Abstract
We present in this paper a new sensor called PICMIC-0 that is intended to exploit the intrinsic spatial resolution of the MicroChannel Plate (MCP) detectors. Manufactured using 6-metal TowerJazz 180 nm wafer technology, the sensor features hexagonal charge collection pixels on the top metal layer with a pitch of 5 μm and covering an area of 7.4 × 6.4 mm2. The 2 million of the pixels of this sensor are not read out individually.Each pixel is connected to a straight-line in either 0°, 120° or -120° orientation, in which a current is produced in case of a hit. Each of these readout strip-lines is connected to a readout cell which receives this current, amplifies it using a current mirror and converts it into a digital signal by means of a current comparator. The data is collected from the digital outputs of the readout cells using a priority encoder readout scheme and transmitted in frames of 400 ns. This projective readout system reduces the number of channels to be read out from 2 million pixels to 2556 readout cells integrated within the pixel matrix. Using three projections reduces the ambiguity in case of multiple hits.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.