Abstract
ABSTRACT The objective of this study was to evaluate the effect of gaseous ozone on the physiological quality of corn seeds with different initial germination percentages. Seeds with initial germination percentages of 54.0% (low physiological quality) and 86.0% (high physiological quality) were used. Samples of 0.12 kg of seeds were exposed to different combinations of inlet ozone concentrations (10 and 30 mg L−1) and exposure times (0, 30, 60, 90, and 120 min). A flow rate of 1.0 L min−1 was used at a temperature of 25 °C. The percentage of germination, shoot, root, and seedling lengths, germination velocity index, and electrical conductivity were analyzed. Univariate and multivariate analysis were used for data analysis. Seeds with low initial germination percentage showed increase of 1.6 to 1.8 times in germination percentage and approximately 1.2 times in length of the seedlings when the inlet ozone concentration was 10 mg L−1 and the exposure times were 30 and 120 min. Regarding seeds of high physiological quality, there was an increase in the germination velocity index of 1.1 to 1.2 times in ozonated seeds at 10 mg L−1, compared to the non-ozonated seeds. According to the multivariate analysis, the inlet ozone concentration of 10 mg L−1 associated with exposure times of 30 and 120 min showed similar results for seeds with low initial germination percentage. Based on the obtained results, we concluded that regardless the initial corn seeds quality, the recommended treatment is made by the combination of inlet ozone concentration of 10 mg L−1 and exposure time of 30 min. Also, greater benefits are obtained from the application of ozone gas in corn seeds of low initial physiological quality. The ozonation proved to be a promising technique for seed treatment since it increased germination percentage and shoot and seedling lengths.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.