Abstract
Two samples clayed materials, LO and NG from central region in Cameroon were characterized for their valorization in the manufacture of refractory bricks and ceramics. In order to assess the technological properties of these clays, cooking tests were carried out on the test specimens at different temperatures. From particle size analysis, clayed materials studied have a spreading particle size and their plasticity index is between 18 and 47. The mineralogical study reveals the presence of Quartz, illite, kaolin, hematite and feldspars. High level of silica content explains the sandy nature of these clays. Linear shrinkage and density increase with temperature while compressive strength decreases with temperature. Analyses performed on the ceramic specimens after firing show that clay materials studied are suitable for the manufacture of refractory bricks.
Highlights
Clays have been used by man since the beginning of time
LO and NG from central region in Cameroon were characterized for their valorization in the manufacture of refractory bricks and ceramics
Analyses performed on the ceramic specimens after firing show that clay materials studied are suitable for the manufacture of refractory bricks
Summary
Clays have been used by man since the beginning of time. The characteristics and chemical composition of clay deposit usually determine its industrial application [1] [2] [3]. The natural abundance and immediate availability of clays explain their great uses over time. The particularity of this material is its capacity to have a plastic state with appropriate levels of water [4]. This material has the power to be shaped, to shrink, to harden after drying and to consolidate after firing, which allows the formation of a vitreous phase [5].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.