Physically based vs. data-driven models for streamflow and reservoir volume prediction at a data-scarce semi-arid basin

Abstract

Physically based or data-driven models can be used for understanding basinwide hydrological processes and creating predictions for future conditions. Physically based models use physical laws and principles to represent hydrological processes. In contrast, data-driven models focus on input–output relationships. Although both approaches have found applications in hydrology, studies that compare these approaches are still limited for data-scarce, semi-arid basins with altered hydrological regimes. This study aims to compare the performances of a physically based model (Soil and Water Assessment Tool (SWAT)) and a data-driven model (Nonlinear AutoRegressive eXogenous model (NARX)) for reservoir volume and streamflow prediction in a data-scarce semi-arid region. The study was conducted in the Tersakan Basin, a semi-arid agricultural basin in Türkiye, where the basin hydrology was significantly altered due to reservoirs (Ladik and Yedikir Reservoir) constructed for irrigation purposes. The models were calibrated and validated for streamflow and reservoir volumes. The results show that (1) NARX performed better in the prediction of water volumes of Ladik and Yedikir Reservoirs and streamflow at the basin outlet than SWAT (2). The SWAT and NARX models both provided the best performance when predicting water volumes at the Ladik reservoir. Both models provided the second best performance during the prediction of water volumes at the Yedikir reservoir. The model performances were the lowest for prediction of streamflow at the basin outlet (3). Comparison of physically based and data-driven models is challenging due to their different characteristics and input data requirements. In this study, the data-driven model provided higher performance than the physically based model. However, input data used for establishing the physically based model had several uncertainties, which may be responsible for the lower performance. Data-driven models can provide alternatives to physically-based models under data-scarce conditions.