Physical scale modelling of stray current interference to shipboard ICCP system

Abstract

ABSTRACTCathodic protection is commonly used for corrosion protection of the underwater hull structures of naval platforms. Cathodic protection works by establishing an electrostatic field that provides the desired potential and current distributions in the seawater surrounding the structures to be protected. Interference to a ship’s cathodic protection system may occur when the ship is alongside a jetty or another naval ship due to the influence of the electrostatic field associated with the cathodic protection system employed on the jetty or another naval ship. The interference may alter the electrostatic field surrounding the ship and, therefore, the level of corrosion protection to the ship hull. In the current study, a physical scale modelling technique is used to evaluate how, and to what extent, the level of cathodic protection on a ship hull could be affected by an external current source. A 1/100 scale ship model with two-zone four-anode impressed current cathodic protection (ICCP) system is used in the study. The modelling results indicate that the presence of stray current may affect the potential distribution along the ship hull. The extent of stray current effect depends on a number of factors including the relative position and layout of stray current source, the magnitude and direction of the stray current flow and the operating mode of the shipboard ICCP system.