Physical principles of operation and basic capabilities of the four channel receiver 1288хк1т (mf-01)

Abstract

In radar detection and radio navigation ensuring the reception of signals transmitted over the meteor channel of radio communication is often controversial[1-3]. Solving these problems requires the ability to synthesize precision signals directly[4, 5] for heterodyning systems in addition to modern analog-to-digital conversion devices, correlation analysis, and statistical processing of signal-noise complex. The step of adapting four channel receivers to dynamically changing conditions of transmitting information may include determining the composition of the signal-noise mixture, determining the phase characteristics of the communication channel, estimating the channel transmission rate, and obtaining QoS information. In addition, adaptation often implies the use of a logical channel control loop, which entails the need for complex feedback procedures. Software-defined radio systems are radio and telecommunication systems that can be tuned to an arbitrary frequency band and receive various types of modulated signal, consisting of programmable equipment with program control. SDR performs a significant part of digital signal processing on a conventional personal computer, signal processor or FPGA. In such systems and complexes, the parameters are changed by software configuration. The article considers the implementation of DDS for heterodyning an intermediate frequency signal on the FPGA basis for four channel receiver 1288хк1т (mf-01), which allows you to work with both narrow-band and wide-band communication channels (with simultaneous operation of 4 channels, the band can be expanded) and can be used in modern telecommunication communication systems.