Abstract
Metallic glasses (MGs) have excellent properties, such as high strength and low elastic modulus, can be used as reinforcement in metal matrix composites. In this paper, aluminum matrix composites reinforced with Fe80Si9B11 MG strips with different weight contents (5, 10, 15, 20 and 25%) were produced by roll-bonding at an initial temperature of 450 °C and 80% deformation. Tensile mechanical tests showed that the tensile strength of the composite sheets containing 10% MG strips showed the highest tensile strength of 166 MPa. Further studies on the sandwich structured samples were conducted using high-pressure torsion (HPT) technology with various pressures of 0.55 GPa, 1.10 GPa, 1.65 GPa, and 2.20 GPa. X-ray diffractometry (XRD), scanning electron microscopy (SEM), TriboIndenter nanomechanical testing, and transmission electron microscopy (TEM) were used to study the microstructures, mechanical properties and the bonding interface of the material. The results show that the hardness near the interface presented a transition area. High-resolution TEM observation showed that physical metallurgical bonding can be achieved between MG and aluminum alloy. A preliminary fitting of metallurgical bonding conditions was carried out according to the experimental parameters of HPT and the interface bonding condition in this study.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
