Physical-Mechanical Properties of Light Bark Boards Bound with Casein Adhesives

Abstract

Based on the background of the limited availability of raw materials in the forestry and timber industry, increased attention applies to sawmill by-products and their potential for future applications. Within the present research, the suitability of a natural binder based on different casein sources, superficially lean curd with different lime ratios, for the production of bark insulation panels from larch bark (Larix decidua) in fraction 12.5–4.0 mm with densities below 500 kg/m³ were discussed and physical and mechanical properties evaluated. In order to obtain a benchmark, control boards bound with powdery casein and urea-formaldehyde resin were fabricated. The evaluation of physical-mechanical characteristics indicated the lean curd panels to be competitive with the references and commercially available insulation materials, whereby higher values could be achieved consistently with a lower lime content of 20% compared to 31%. The best moisture resistance and water absorption were observed with a lime ratio of 31%, whilst thickness swelling and mechanical characteristics were best with a lime content of 20%. Particularly with regard to mechanical properties, panels containing a low proportion of lime in the lean curd blends delivered convincing results, e.g., with an average IB of 0.19 N/mm2, MOR of 1.43 N/mm2 and C of 1.70 N/mm2. In terms of thickness swelling, lean curd adhesives generated unsurpassed values of approximately 11% compared to the casein and urea-formaldehyde references. Additionally, as described in the relevant literature, a considerable influence of density on the mechanical behavior of composite materials was observed. Partly, the lime content significantly influenced the panel properties. The study proved that natural binders based on lean curd and lime are suitable for the production of bark insulation boards and represent a serious alternative to synthetic, oil-based adhesive systems. The results are promising with regard to the market situation due to the availability and pricing of raw materials and technical requirements and demonstrated great potential for further research efforts.