Physical Considerations in the Development of Pressure-Sensitive Adhesive Sheets

Abstract

Abstract A pressure-sensitive adhesive sheet is a special kind of paper used in non-impact printers which use a heating process to apply toner to paper. As a result, it needs special characteristics that general pressure-sensitive adhesive paper for labels do not require. One of these characteristics is that the edge of the folded paper used in non-impact printers must not incline after printing. This was done by making the degree of orientation of the fibers in the face stocks and the release liners low. The other characteristics are that adhesive must not ooze out from the edges during the slitting or guillotining process and that the labels must not come off of the release liner by themselves during the printing process. Ooze characteristics were found to be related to the adhesive coat weight. An adhesive paper with both a high peel strength and lower adhesive coat weight was developed by studying the dynamic viscoelastic properties of adhesives and release layers. The storage modulus of the release layer concerned with the release force was also found to be related to the self-peeling tendency of the labels. These points were considered during the development of pressure-sensitive adhesive paper used in non-impact printers which use a heating process to apply toner to paper.