Abstract
Novel nanocomposites consisting of a water-soluble acrylamide-based photopolymer and colloidal zeolite nanoparticles of zeolite Beta and zeolite A were prepared. The interactions between the photopolymer components and zeolite nanoparticles in the photopolymerizable nanocomposites were characterized for the first time by (13)C nuclear magnetic resonance and visible spectroscopy. It was found that the zeolite Beta nanoparticles (up to 5 wt. %) behave as a noninert additive, resulting in an effective increase in layer thickness, which causes doubling of the diffraction efficiency of the nanocomposite in comparison to that of the undoped photopolymer. On the other hand, the nanocomposite containing zeolite A nanoparticles showed no evidence of interaction with the polymer matrix, had similar values of diffraction efficiency, and--up to a small addition of nanoparticles (up to 2.5 wt. %)--showed slightly higher light-induced refractive index modulation of the grating when compared to the undoped photopolymer. The good optical compatibility between the zeolite nanoparticles and the polymer allows a versatile design of photopolymerizable nanocomposites with different properties by selecting the adequate type of zeolite. The nanocomposite containing zeolite Beta nanoparticles demonstrates selective sensing behavior toward toluene and can be coated in either glass or plastic substrates and exposed directly to the environmental conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.