Abstract
A novel photonic scheme for generating multi-band dual-chirp waveforms with linear or nonlinear chirp rates is proposed via two cascaded polarization modulators (PolMs) paralleled with a phase modulator (PM). The cascaded PolMs produce a flat optical frequency comb (OFC) as a multi-frequency reference light, while the PM is driven by the power-function-type baseband signals to obtain the lightwave with different order phase chirp. The phase-chirped lightwave and the multi-frequency reference lightwave are orthogonally coupled by a polarization beam combiner (PBC) and then recombined via a polarization beam splitter (PBS) to make them in-phase in one output port of the PBS and anti-phase in the other. The two recombined lightwaves are detected by a balanced photodetector (BPD), and the different order dual-chirp signals, covering six bands, can be generated in their differential photocurrent without interference components. Compared with the single-chirp signal of the knife-edge-type ambiguity function, the dual-chirp signal with the peak-saliency-type ambiguity function significantly suppresses sidelobe and shows better range-Doppler resolution performance. With the 1GHz-bandwidth and 102.4ns-duration quadratic baseband driving signal, six-band linear dual-chirp signal, centered at 10, 30, 50, 70, 90 and 110GHz, are generated by simulation, and each linear dual-chirp signal has a bandwidth of 4.1GHz, the pulse compression ratio of 465.45 and the peak-to-sidelobe ratio (PSLR) of 12.8dB. As baseband driving signal has higher (3rd) order power, the six-band nonlinear dual-chirp signals with the same central frequencies can also be generated but with increased bandwidth (6.3GHz) and the improved PSLR (15.51dB). Their autocorrelation functions show that compared with the linear chirp signal, the nonlinear chirp signal has better sidelobe suppression capability, which is improve as the degree of nonlinearity increase.
Highlights
The radar working in different radio spectral regions performs different functions depending on the carrier frequencies utilized
The upper beam is coupled into the cascaded polarization modulators (PolMs) module for radio frequency (RF) modulation to obtain a multi-tone reference light, while the lower beam is coupled into the phase modulator (PM) driven by the power-function-type baseband signal from an arbitrary waveform generator (AWG) to introduce the phase chirp
SIMULATION RESULTS AND DISCUSSIONS To demonstrate the feasibility of the proposed scheme based on the parallel PolM and PM to generate multi-band linear/nonlinear dual-chirp signals, a simulation setup based on Fig. 1 was built
Summary
The radar working in different radio spectral regions performs different functions depending on the carrier frequencies utilized.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
