Photoelectrocatalytic Oxidation of Sulfamethazine on TiO2 Electrodes

Abstract

The photoelectrocatalytic degradation and mineralization of sulfamethazine (SMT), a sulfonamide drug, were explored in aqueous solution. Working electrodes with TiO2 coatings on Ti substrates (TiO2/Ti) were used, which were produced by the dip coating method. TiO2 film electrodes were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) following annealing at 500 °C for 1.5 h. To photoelectrochemically characterize them, photocurrents vs. applied potential curves were used. The photoelectrocatalytic efficiency (PEC) of the TiO2/Ti electrodes regarding the oxidation of SMT has been assessed with reference to degradation and mineralization under different experimental conditions. The selected drug molecule was effectively degraded following the Langmuir–Hinshelwood (L-H) kinetic model. The degradation efficiency was shown to increase with increasing applied potential bias up to +1.5 V vs. Ag/AgCl. It was found to be more favorable in acidic environments compared to alkaline ones. A decrease in the destruction rate constant was recorded when the pH was increased from 3 to 5.6 (natural pH) and 9. The decomposition rate was shown to first increase and subsequently reach a saturation value at high concentrations of SMT, indicating that the degradation also depends on other parameters (e.g., the rate of the charge or the mass transfer on the electrode double layer). The results of the photoelectrocatalytic experiments were compared to those of electrochemical (EC) and photocatalytic (PC) degradation of SMT. A significant enhancement was recorded in the case of the PEC degradation, leading at +1.5 V to an increase of the apparent rate constants of degradation, k, and mineralization, kTOC, of 153 and 298%, respectively, compared to the simple photocatalytic process.