Photoelectric characteristics of hydrogen-terminated polycrystalline diamond MESFETs.

Abstract

In the field of diamond MESFETs, this work is what we believe to be the first to investigate the optoelectronic properties of hydrogen-terminated polycrystalline diamond MESFETs under visible and near-UV light irradiation. It is shown that the diamond MESFETs are well suited for weak light detection in the near-ultraviolet region around the wavelength of 368 nm, with a responsivity of 6.14 × 106 A/W and an external quantum efficiency of 2.1 × 107 when the incident light power at 368.7 nm is only 0.75 µW/cm2. For incident light at 275.1 nm, the device's sensitivity and EQE increase as the incident light power increases; at an incident light power of 175.32 µW/cm2 and a VGS of -1 V, the device's sensitivity is 2.9 × 105 A/W and the EQE is 1.3 × 106. For incident light in the wavelength range of 660 nm to 404 nm with an optical power of 70 µW/cm2, the device achieves an average responsivity of 1.21 × 105 A/W. This indicates that hydrogen-terminated polycrystalline diamond MESFETs are suitable for visible and near-UV light detection, especially for weak near-UV light detection. However, the transient response test of the device shows a long relaxation time of about 0.2 s, so it is not yet suitable for high-speed UV communication or detection.