Abstract
The fabrication and characterization of an optically addressable deformable mirror for a spatial light modulator are described. Device operation utilizes an electrostatically driven pixelated aluminized polymeric membrane mirror supported above an optically controlled photoconductive GaAs substrate. A 5 mum thick grid of patterned photoresist supports the 2 mum thick aluminized Mylar membrane. A conductive ZnO layer is placed on the backside of the GaAs wafer. Similar devices were also fabricated with InP. A standard Michelson interferometer is used to measure mirror deformation data as a function of illumination, applied voltage, and frequency. The device operates as an impedance distribution between two cascaded impedances of deformable membrane substrate, substrate, and electrode. An analysis of device's operation under several bias conditions, which relates membrane deformation to operating parameters, is presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.