Abstract
This study investigates the field-weakening capability of interior permanent magnet (IPM) and surface-mounted permanent magnet (SPM) machines with distributed windings by considering phase voltage distortion in field-weakening region. For analysis and comparison, the Nissan Leaf vehicle traction machine is studied as a reference benchmark machine and then a comparable SPM machine is designed within the main constraints of the benchmark machine. A finite element analysis model of the benchmark machine is developed and validated by published experimental measurement. Sinusoidal phase current is desired to enhance machine torque performance and power electronic converters employing vector control method are commonly used for traction machine supply. However, the machine terminal phase voltage distortion may introduce additional difficulties for machine control. Therefore, firstly, phase voltage distortions of IPM and SPM machines with distributed windings are compared and the mechanisms are discussed. Due to the voltage distortion, the peak value of phase voltage may be higher than the fundamental one. Therefore, the influences of IPM and SPM topologies on machine traction characteristics are investigated. The study indicates that SPM machines with distributed windings can be designed to achieve comparable torque and power performance and better field-weakening capability compared to IPM machines.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.