Abstract
Hot stamping of boron steels is a thermal-mechanical and phase transformation coupled process. The phase transformation of boron steels during continuous cooling is a complex process since the phase transformation is tightly coupled with plastic deformation during the hot stamping process. In the present work, the effects of hot deformation amount, deformation temperature, and strain rate on phase transformation are investigated by using a comprehensive set of methods including in-situ isothermal tensile tests combined with dilatometry and ex-situ microstructure characterization. The dilatation curves, phase fraction evolution curves, continuous cooling transformation (CCT), and deformed continuous cooling transformation (DCCT) diagrams are constructed. Finally, based on the testing results, a new non-isothermal kinetic model of phase transformation are proposed to introduce the effect of the austenite deformation on transformation during the continuous cooling. The proposed model is validated by testing Vickers hardness of DCCT specimens and hot stamping W-channel parts. The results demonstrate that the deformation accelerates the diffusive phase transformation, causing the CCT curves to move in the direction of shorter incubation time. But the acceleration of diffusion transformation is rapidly saturated as the plastic strain increases. Lower deformation temperature and higher strain rate are more favorable to the diffusion phase transformation, and the higher the critical cooling rate of the martensite transformation is needed. The proposed kinetic model not only accurately predicts the final phase fraction and hardness of the DCCT specimen, but also the distribution of mechanical properties of the hot stamping W-channel parts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.