Abstract
Iron is a common impurity element in Al–Si alloys. The existence of Fe promotes the formation of needle-like iron-rich phase, which has an adverse effect on the macroscopic mechanical properties. In this study, the effects of casting temperature, Fe content and melt ultrasonic treatment on the morphology of β-Al9Fe2Si2 were investigated by phase-field simulation and experiment. The results show that when the casting temperature is close to the liquidus temperature, the grain size of the precipitated phase will be refined. The increase of iron content in the alloy will promote the increase of average grain size and volume fraction of iron-rich phase by inhibiting the growth of α-Al grains. In addition, the elevation of both casting temperature and Fe content promotes the transformation of the β-Al9Fe2Si2 from short rod-like to needle-like with large scale. The melt ultrasound inhibits the transformation to β-Al9Fe2Si2 by promoting the nucleation and growth of α-Al8Fe2Si. Melt ultrasound, casting temperature and iron content together cause the change of needle-like iron-rich phase morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.