Abstract

Reservoir pressure relief is a practical method to enhance permeability for coalbed methane (CBM) extraction in tectonically deformed coal (TDC) reservoirs. To explore the coal permeability response to stress changes, the primary undeformed coal (PUC) and TDC from the same coal seam were sampled for the pore–fissure structure analysis, mechanical property test, and permeability experiments under different stress loading–unloading methods in this study. The experimental results demonstrated that the coal permeability is more sensitive to the changes in confining pressure (perpendicular to airflow) than axial stress (parallel to airflow). Coal permeability decreases negatively exponentially as the confining pressure increases, and its change process with increased axial pressure can be divided into five stages in this study. The pore structures and mechanical properties of coal samples affected their permeability response to stress changes. Under the stress loading condition, the coal matrix and fractures of PUC samples were compressed simultaneously, and the permeability was regulated by the pore–fissure structures in the coal matrix. Due to the deformation and displacement of coal particles, the permeability of the TDC sample is predominantly dependent on changes in intergranular pores. At the initial stress unloading stage, the fissure recovery and expansion lead to a rapid increase in permeability, but the permeability cannot rereach the original value when the stress is fully released. Furthermore, the influencing factors of coal permeability in response to stress loading–unloading also include confining pressure conditions and coal matrix adsorption swelling. Research on the permeability response characteristics of the stress loading–unloading process can provide some clarifications for the reservoir depressurization and permeability enhancement of CBM extraction in the TDC reservoir.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call