Peridynamic correspondence model with strain gradient elasticity for microstructure dependent size effects

Abstract

This study presents a peridynamic (PD) correspondence model with strain gradient elasticity (SGE) to capture size effect on strength of nano- and micro-scale structures. The classical elasticity theory lacking a length scale parameter does not account for the microstructure-dependent size effects. Strain Gradient (SG) elasticity is an extension of the classical elasticity with a length scale parameter(s) which can be linked to the microstructure of the material. Peridynamic theory introduces damage into the constitutive relations in a natural way by allowing for interactions of a material point within its horizon which is referred to as the internal length parameter. The correspondence model of the PD theory permits the incorporation of the constitutive relationship of SG theory. Therefore, the present approach combines the effects of PD and SGE length scale parameters on the stiffness and strength of the material. The resulting equations present two length parameters: the horizon of a material point in PD theory and the characteristic length in SGE theory. The PD equation of motion with SGE (PDSG) is free of spatial derivatives and allows for the imposition of classical and nonclassical boundary conditions. The PDSG is first applied to investigate the deformation response of a one-dimensional nanoscale film subjected to a quasi-static tensile load and a dynamic load through an initial constant strain. The static response is compared with the analytical solution for varying ratio of SG length parameter to PD horizon. The dynamic response is compared with a computational solution while satisfying the nonclassical boundary conditions. Subsequently, the PDSG is applied to study the deformation response of a two-dimensional nanoscale film subjected to a quasi-static axial load and a specified tangential end displacement. These two cases are considered under special displacement constraints to compare with the available analytical solutions. Subsequently, a two-dimensional nanoscale film with or without an internal crack is subjected to uniform tensile loading. Finally, crack propagation is simulated under incremental displacement loading. The results capture the analytical predictions and the expected increase in stiffness with increasing ratio of SG length parameter to PD horizon.