Abstract
The capability of various metals used in optical fibre-based surface plasmon resonance (SPR) sensing is studied theoretically. Four metals, gold (Au), silver (Ag), copper (Cu) and aluminium (Al) are considered for the present study. The performance of the optical fibre-based SPR sensor with four different metals is obtained numerically and compared in detail. The performance of optical fibre-based SPR sensor has been analysed in terms of sensitivity, signal-to-noise (SNR) ratio and quality parameter. It is found that the performance of optical fibre-based SPR sensor with Au metal is better than that of the other three metals. The sensitivity of the optical fibre-based SPR sensor with 50 nm thick and 10 mm long Au metal film of exposed sensing region is 2.373 μm/RIU with good linearity, SNR is 0.724 and quality parameter is 48.281 RIU − 1. The thickness of the metal film and the length of the exposed sensing region of the optical fibre-based SPR sensor for each metal are also optimized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
