Abstract
Performance of an adsorptive heat pump has been studied. The factors affecting the efficiency of its work have been analyzed. Operating parameters and efficiency of adsorptive heat pumps and adsorptive heat storage devices have been compared. An algorithm of calculating the basic operating characteristics of an adsorption heat pump in heat supply systems has been proposed. It involves calculating the mass transfer coefficient, final absolute humidity of the air flow passed though adsorbent layer, the water uptake or adsorption and the useful heat of adsorption and heat of condensation, determination of heat inputs for the operation of the device such as heating the adsorbent, case of the device, hydraulic circuit, the water in the tank and adsorbed water, heat of desorption and heat of evaporation, estimation the coefficient of energy performance. The evaluation criteria of the efficiency of adsorptive heat pumps and heat storage devices have been compared. It is shown that the operating parameters of the adsorptive heat pump and the adsorptive thermal energy storage device based on composite adsorbents ‘silica gel – sodium sulfate’ and ‘silica gel – sodium acetate’ are the same, i.e. airflow rate 0.08 - 0.1 m3/s and initial absolute humidity of airflow 0.03 – 0.04 kg/m3, which are corresponded with maximal efficiency of the device. The temperature of the humid air flow directed to the adsorbent layer is suggested to be set at 20 – 40 °C. The measures to increase the efficiency of the adsorptive heat pump are proposed. It is shown that ultrasonic air humidification allows to increase the coefficient of energy performance by almost 2 times compared to steam humidification. The obtained results can be used for developing energy-efficient heating systems of residential premises.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have