Performance investigation of a novel free piston Stirling pump for reverse osmosis desalination systems

Abstract

Renewable energy (RE)-powered desalination technology is considered a cleaner and promising alternative for alleviating energy exhaustion and environmental pollution resulting from traditional desalination. Currently available solar thermal reverse osmosis (RO) desalination systems are based on the organic Rankine cycle. With the aim to expand the driving mode of reverse osmosis desalination as well as simplify the transmission chain and reduce mechanical energy losses, a novel hydraulic free piston Stirling pump (FPSP) is developed and a simple model is designed and tested for conceptual validation. A free piston Stirling pump - powered reverse osmosis desalination system is presented, and a thermodynamic–dynamic coupling model is established. A parametric analysis is performed with an emphasis on the effects of temperatures, charge pressure, spring stiffnesses, damping coefficients, and masses on the system performance, including the frequency, power output, water yield, and efficiency. Results showed that the frequency in the pumping process was higher than that in the suction process because of the different loads. Within the range investigated, the performance improved as the hot-end temperature, charge pressure, spring stiffnesses, and damping coefficient of the power piston increased, while it deteriorated with a decrease in the damping coefficient of the displacer and the piston masses. Specifically, the power output and water yield reached the optimum value as the cold-end temperature was maintained around 310 K. Under representative parameter conditions, the power output could reach 12.15 kW and the water yield was approximately 6.07 × 10−4 m3/s. In addition, the temperatures and charge pressure influence the system efficiency most.