Abstract
Gas sensors are essential devices in various industrial and environmental monitoring applications. Nitric oxide (NO) is a harmful gas that is produced in various combustion processes and is associated with air pollution and respiratory diseases. Zinc gallate (ZnGa2O4) has shown promising results as a material for NO gas sensing applications. Previously, the performance of NO gas sensors based on ZnGa2O4 epilayers was not substantial. However, there is potential for further improvement by optimizing their surface properties. Plasma surface treatment has been widely utilized to modify the surface characteristics of materials, including semiconductors, for various applications. We have investigated the impact of plasma surface treatment on the performance of metal–organic chemical vapor deposition grown ZnGa2O4 based NO gas sensors in this work. An inductive coupled plasma reactive ion etching was used to apply Ar plasma to successfully optimize the sensing response of the ZnGa2O4 based gas sensor for NO gas. The sensor response for ZnGa2O4-based NO gas sensors is 159.5%, which is enhanced by 8 times and reached 1276.1% under 5 ppm NO gas concentration after 10 min Ar plasma treatment. The limit of detection is found to be 2.4 ppb. These results demonstrate that Ar plasma treatment significantly improved the ZnGa2O4-based NO gas sensor’s response. The cross-selectivity of this sensor is tested among NO, CO2, CO, and SO2 gases, which indicated that ZnGa2O4 gas sensor possess highly selectivity towards NO gas. This study provides valuable insights into the surface modification techniques for enhancing the performance of gas sensors, which can have a significant impact on the development of advanced sensing technologies for environmental and industrial applications.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
