Abstract
This study sheds light on the performance of the common high-precision electromagnetic sensor TEROS 10 to estimate volumetric soil water content (θ) from dry to saturation across three different substrates, six different soil types having three different levels of electrical conductivity of soil solutions (ECw), and in liquids with increasing salinity level under laboratory conditions, by using low-cost but accurate experimental IoT hardware arrangements. This performance was evaluated using statistical analysis metrics such as Root Mean Square Error (RMSE). It was found that TEROS 10 performance did not conform to the manufacturer’s specifications throughout the full scale range, although in some cases good water content estimation was provided. Some inconsistencies were identified by applying the manufacturer’s calibration equations, and thus recommendations for improvements are provided, aiming to enhance the sensor’s overall performance. TEROS 10 performance across all six soils and three substrates was improved on average from an RMSE of 0.052 and 0.078 cm3 cm−3, respectively, by using factory-derived calibration, to 0.031 and 0.031 cm3 cm−3 by using the multipoint calibration method (CAL). Furthermore, a linear calibration formula, using Raw output as the predictor variable, was tested and resulted in an RMSE of 0.026 and 0.046 cm3 cm−3 for soils and substrates, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call