Performance Evaluation of Radiation-Shielding Materials and Process Technology for Manufacturing Skin Protection Cream.

Abstract

Personnel using X-ray devices, the main source of radiation in medical institutions, are primarily affected by scattered rays. When interventionists use radiation for examinations/treatments, their hands may enter the radiation-generating area. The shielding gloves used for protection against these rays restrict movement and cause discomfort. Here, a shielding cream that directly adheres to the skin was developed and examined as a personal protective device; further, its shielding performance was verified. Bismuth oxide and barium sulfate were selected as shielding materials and comparatively evaluated in terms of thickness, concentration, and energy. With increasing wt% of the shielding material, the protective cream became thicker, resulting in improved protection. Furthermore, the shielding performance improved with increasing mixing temperature. Because the shielding cream is applied to the skin and has a protective effect, it must be stable on the skin and easy to remove. During manufacturing, the bubbles were removed, and the dispersion improved by 5% with increasing stirring speed. During mixing, the temperature increased as the shielding performance increased by 5% in the low-energy region. In terms of the shielding performance, bismuth oxide was superior to barium sulfate by approximately 10%. This study is expected to facilitate the mass production of cream in the future.