Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity.

Abstract

Water scarcity necessitates a cost-effective and productive solution. This study focused to enhance the productivity of single slope solar still by incorporating the better weight of palm flower powder (micro-sized) in the basin and micro phase change material heat storage bed under the basin. In this aspect, the different quantity of palm powder weights such as 10, 30, 50, 70, 100, 120 and 150 g in the basin was experimentally examined. The absorber basin containing 50 g of palm powder has better productivity of 37.25%, whereas for 10, 30, 70, 100, 120 and 150 g, they were 11.85, 24.78, 36.8, 33.05, 10.25 and - 20.22% respectively. The influence of palm powder with different weight% impregnated in the paraffin wax was analysed. The maximum thermal conductivity of 0.33 W/m K was obtained in the sample containing palm flower powder of 20 wt%. The experimental investigation was carried out with 50 g of micro-sized palm powder in the basin and thermal storage bed under the basin containing 20 wt% of micro phase change material (PCMPFP-SS) and conventional solar still (CSS). The overall distillate output of PCMPFP-SS was 4670 and 4250 mL/m2 on day 1 and day 2 respectively. On the other hand, the overall distillate output for CSS was 3030 and 2800 mL/m2 on day 1 and day 2. From the economic analysis, it was found that the cost per litre (CPL) of PCMPFP-SS and CSS was $ 0.025 and $ 0.032 respectively. Moreover, the payback period of PCMPFP-SS was lowered from 5.1 to 4.1 months compared to CSS.