Abstract
This project is aimed at the implementation of a fuzzy logic algorithm based maximum power point tracking in transformer less grid connected PV system along with reactive power compensation. A single diode model is used for PV array and its simulation is performed using MATLAB. In fuzzy logic controller, voltage and current are taken as inputs and the effective value of A.C current corresponding to the maximum power point is obtained as output. Thus, in addition to supplying voltage by the inverter without transformer for compensating the reactive power not exceeding its power rating. This results in utilization of PV system at night and at periods of low irradiation. Rules relating the input and output of fuzzy logic controller are written and simulation is performed. A LUO Converter is used for maintaining DC input to the inverter at various conditions of irradiation and temperature. Gating pulses to the inverter are generated by proportional-integral controller. Hardware model of a10W solar panel is developed and results are obtained with fuzzy logic controller for different irradiation and temperature conditions. Results show the effectiveness of the proposed method in utilizing the PV system. This project is implemented using DSPIC30F2010 controller.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.