Abstract
This paper aims to build a smart lighting system with applications such as remote for controlling power supply and optimizing heat management in the metal body of the semiconductor diode and with a printed circuit board for agriculture. The semiconductor diode strips with multiple colors are lined up and configured as a LED lamp with proper casing and heat sink. It has a driver circuit with required power regulation that is able to control the intensity of light for photosynthesis and plant growth requirements. The system uses hydroponics to plant the water, thus decreasing the usage of fertilizers. The entire system is controlled remotely using necessary communication interface application.
Highlights
Related Works e authors in [1] have devised a new digital control strategy that is presented for a bridgeless single-stage multioutput AC/DC converter previously proposed as an semiconductor diode grow light. e proposed control system can regulate the output current flowing through each individual diode string, perform power factor correction at the AC side, and provide zero-voltage switching characteristics for all power semiconductors, and the new method reduces conduction
To build a sustainable system, they have utilized an Light-emitting diodes (LEDs) lighting system together with conserved energy generated by sunlight
According to Energy Star, the LEDs can save energy at a rate of 90 percent more than incandescent bulbs. e way LED lighting works is when the light source is turned on, it is directional. is means that the LED light aims in a certain direction to provide illumination
Summary
After the die bonding is performed, the frames are again placed in oven 2 at 175 degrees for 2 hours. After the wire-bonding process is complete, the frames are once again placed in oven 1 for precuring for half an hour before they go to the dispenser. E dispensing machine [19, 22] is used to apply high viscous liquids paste material on LED bulbs as well as other round applications. E frame tester is a device that will test the electricity flow in the frame and check whether each and every LED is glowing or not It will place two metal sticks at the terminals of the LED and give the required voltage to turn it on [25]. Packing. e reels are placed in a cover and using a vacuum, the air is sucked out and sealed
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
