Perbaikan Kualitas pada Proses Kiln Tegel Keramik Kode GE dengan Metode Six Sigma DMAIC (Studi Kasus PT. IKAD Tangerang)

Abstract

PT. IKAD is a company that produce ceramic tile. Quality is occurred on some Critical To Quality (CTQ) in part of kiln. Kiln process itself was the last process and the most vital in determining final output of ceramic tile. Realizing the importance to the quality of kiln process, hence needed a problem solving method to improve and control process which taking place in Department Plant 3 so the amount of defect product can be minimized to achieve zero defect. The method to solve the problem is Six Sigma method that consist of Define, Measure, Analyze, Improve, and Control (DMAIC)phase. DMAIC phase begins with identifyng customer needs to determine priority of CTQ. Then measuring the sigma level, stability and process capability of priority CTQ. On the analyze phase, cause effect diagram is used to find failure cause analysis of CTQ, and then Failure Modes Effect Analysis (FMEA) tool is used to analyze the failure. On the final phase, improvement plan and process control act is done for company. The result of this research from Define phase is dash away as the priority of CTQ. On the measure phase known that sigma level in the month of January 2006 equal to 3,46 sigma and decrese to 3,24 sigma in February 2006. at that both period, process condition is not atable but capable enough if seen from CP and Cpk value. On the analyze phase is obtained the information that many factors like process or method, man, material, measruement, mother-nature, also machine and equipments are supposed causing instability and incapability of kiln process. iprove suggestions for managerial and technical side are given and Control suggestions to guarantee the quality of kiln process are also given on the Improve and Control phase.