PEO-based polymer electrolytes in lithium ion batteries

Abstract

Currently, electrolytes used in lithium-ion batteries are flammable and leaky, causing safety problems when used under high temperatures or extreme conditions. Solid electrolytes can fundamentally avoid the occurrence of such issues, at the same time, it can significantly increase the energy density of solid state lithium batteries. Solid electrolytes are classified into inorganic solid electrolytes and solid polymer electrolytes. Although inorganic solid electrolytes have the high mechanical strength and room temperature ionic conductivity, it has poor flexibility and complicated preparation process. In contrast, solid polymer electrolyte has good elasticity and good interface contact, which can overcome many disadvantages of the inorganic solid electrolyte. Among them, polyethylene oxide (PEO) is first proposed as a polymer electrolyte. Due to its excellent mechanical properties, electrochemical stability and thermal stability, it has been a hot topic for polymer solid electrolytes for decades. However, its low room temperature ionic conductivity limits practical application. Given the problems existing in PEO-based polymer electrolytes, several methods for improving ionic conductivity have been proposed. The primary methods include plasticization, the organic-inorganic composite, and polymer blending. Comparing these methods, it can be seen that adding plasticizers to the polymer can effectively increase the conductivity of the electrolyte, but at the same time it will cause a decrease in the mechanical properties, and the safety issues limit its application in lithium-ion batteries. Inorganic fillers can balance the problems of ionic conductivity and mechanical properties, but the construction of a good filler-polymer dispersion system is complicated in preparing such composite electrolytes, design a new type of multi-dimensional the ion transport network also face tremendous challenges. Undoubtedly, in the future research, inorganic fillers will be the dominant means in the modification of composite electrolytes. Compared with the former two modification methods, polymer blending is easy to operate and friendly to industry, but low ionic conductivity at room temperature still exist. To give full play to the advantages of polymer blending, using it as an auxiliary means to improve the performance of composite electrolytes will be the primary development direction of such modification methods. PEO is the most widely studied polymer electrolyte. Even though a large number of modification methods have emerged in its development history, the ionic conductivity at room temperature is still limited to a relatively low level. To meet the needs of the application in lithium-ion batteries, a high operating temperature (50−70℃) is still needed, the biggest problem remains exist. To solve the problems in polymer solid electrolytes, the research directions in the future may mainly focus on: Expanding the modification method of PEO to other polymer electrolyte host materials, broadening the scope of research, and finding the available polymer electrolytes at room temperature. Concerned about the preparation of ultra-thin polymer electrolytes, reducing the ion transmission path to increase the transmission efficiency of lithium ions between positive and negative electrodes. Effectively combines inorganic solid electrolytes and solid polymer electrolytes to give full play to their advantages. In addition, exploring the effect of inorganic filler morphology on the conductivity of the composite electrolyte will also deserve attention. Many one-dimensional, two-dimensional materials can build ion transport networks so that lithium ions can travel rapidly along the path. With the deepening of research, it is expected that PEO-based polymer electrolytes may replace liquid electrolytes and become an essential cornerstone for building the next generation of safe and reliable lithium-ion batteries.