Abstract

Photodiode is a type of photodetector. P-I-N (PIN) link photodiode was chosen in this study. This selection is based on high sensitivity and rapid response to any changes in light. BPW 34 type photodiode is used as a photodetector and RGB bright LED as its light source. The selection of RGB bright LEDs is based on its ability to automatically change the beam spectrum based on bit changes. As a medium for propagating light, a single mode optical fiber is used. In addition to designing hardware, this research also designs applications through Arduino IDE 1.0.4 and LabVIEW 2013 so that hardware can be controlled and displayed on a PC. As a microcontroller, the Arduino UNO module was used in this study. The results of this study indicate that the rays on the RGB bright LED can be controlled through the bit system on a PC (Personal Computer), and can bring up the measurement results of sugar content through a PC.

Highlights

  • Science and TechnologyPengujian sensor fotodetektor sebagai alat ukur kadar gula pada larutan gula Alex Taufiqurrohman Zain 1*, Cahyaning Nur Karimah 1, Anni Nuraisyah 2, Misto.

  • Fotodioda jenis BPW 34 digunakan sebagai fotodetektor serta RGB bright LED sebagai sumber sinarnya.

  • Hasil penelitian ini menunjukkan bahwa sinar pada RGB bright LED dapat dikendalikan melalui sistem bit pada PC (Personal Computer), serta dapat memunculkan hasil pengukuran kandungan gula melalui PC.

Read more

Summary

Science and Technology

Pengujian sensor fotodetektor sebagai alat ukur kadar gula pada larutan gula Alex Taufiqurrohman Zain 1*, Cahyaning Nur Karimah 1, Anni Nuraisyah 2, Misto. Fotodioda jenis BPW 34 digunakan sebagai fotodetektor serta RGB bright LED sebagai sumber sinarnya. Hasil penelitian ini menunjukkan bahwa sinar pada RGB bright LED dapat dikendalikan melalui sistem bit pada PC (Personal Computer), serta dapat memunculkan hasil pengukuran kandungan gula melalui PC. Penelitian tersebut menunjukkan bahwa intensitas sinar berbanding lurus dengan konsentrasi glukosa yang terkandung dalam air destilasi. Aini et al, (2013) juga melakukan pengujian kadar glukosa dalam air destilasi menggunakan serat optik berbasis sensor pergeseran dengan fiber coupler. Penelitian ini dilaksanakan untuk mengetahui kandungan gula dari larutan dengan memanfaatkan fotodetektor yang selanjutnya terintegrasi dengan sistem pada personal computer (PC). Pada penelitian ini RGB (Red-GreenBlue) bright LED digunakan sebagai sumber sinar, PIN fotodioda BPW 34 sebagai fotodetektor, dan serat optik sebagai media penjalaran. Modul Arduino UNO digunakan sebagai modul mikrokontroler untuk menghubungkan alat ukur yang dibuat dengan PC. Selain itu history data yang terukur juga diharapkan mampu untuk disimpan sebagai pengembangan penelitian lebih lanjut

LANDASAN TEORI
ELECTRIC CURRENT
MATODE PENELITIAN
Pengujian Rangkaian Pengendali RGB Bright LED
LED mati
PENUTUP Kesimpulan
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.