Penggabungan Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> dalam Matriks Poli (Metil Metakrilat) untuk Aplikasi Memori Tidak Meruap

Abstract

MXenes, with their unique surface properties and 2D structure, have demonstrated promising potential in electronic devices, particularly in memory storage. This study explored the potential of 2D Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> for the nonvolatile memory (NVM) application. The simple solution process routes were used to fabricate the two-terminal bistable switching devices. The silver nanowires/nanocomposite/ITO structure was deposited on a glass substrate using spin coating and spray coating techniques. The Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene flakes were incorporated into a poly(methyl methacrylate) (PMMA) polymer host to form the nanocomposite and act as a charge-trapping layer. Meanwhile, PMMA acts as a dielectric layer. The measured current-voltage data showed a bistable current behavior with the presence of a memory window. The fabricated NVM memory devices were reprogrammable when the endurance test was performed and stable up to 1×104 s cycles with a distinct ON/OFF ratio of 103. The conduction mechanisms were identified using the curve-fitting method with double log plots of current-voltage (I-V) data. Based on the obtained I-V characteristics, various conduction mechanisms, especially Schottky and Poole-Frenkel emission, trapped charge limiting current, and space charge limited current, were proposed to be responsible for the bistable switching behavior. Thus, the results of this study provide an experimental basis for using MXene in non-volatile memory applications.