Abstract

The influence of land cover and intensity is one of the factors that influence the value of surface flow coefficient (C). The coefficient value will affect the surface flow occurs during peak discharge. In this research, calculate surface coefficient (C) with variation intensity 40 mm/h, 50 mm/h, 60 mm/h, 70 mm/h for land cover paving block (brick pattern and matting pattern), grass block , mini elephant grass, sand and concrete pavement. This test is expected to be the solution in choosing the right type of land cover as a substitute for concrete pavement in the parking lot, park, or home or office yard. The implementation methodology was carried out by laboratory testing with rainfall simulator, 4 cm high base layer of sand and various land cover around 4 cm. The test that carried out in this study include filter analysis, rain intensity and surface coefficient value (C) testing. Testing value of coefficient including the test using rational formulas and testing by definition (Scwab, 1981 and Mc Guen, 1989). The result of this research obtained coefficient of land cover paving block pattern of stacking brick 0,857-0,891, in land cover paving block matting pattern 0,825-0,856, while at grass block 0,677-0,765. The coefficient of surface flow (C) for concrete pavement cover is 0.961-0,997, mini elephant grass cover is 0,483-0,538, while without land cover is 0,559-0,639. The value of surface flow coefficient (C) is getting bigger with increased rain intensity and land cover that has fewer gaps, in this case there is a significant difference in the paving block and grass block.

Highlights

  • of the factors that influence the value of surface flow coefficient

  • affect the surface flow occurs during peak discharge

  • This test is expected to be the solution in choosing the right type of land cover as a substitute

Read more

Summary

PENDAHULUAN

Berkembangnya sebuah kota memicu pembangunan kawasan aktivitas sehari-hari, dimana lahan terbuka menjadi lapisan aspal dan beton pada jalan. Sehingga dengan masalah tersebut akan dilakukan penelitian suatu uji model laboratorium pengaruh variasi intensitas hujan dan tutupan lahan terhadap nilai koefisien aliran permukaan (C) menggunakan rainfall simulator. Suripin (2004) mengemukakan faktor utama yang mempengaruhi nilai C adalah laju infiltrasi tanah atau persentase lahan kedap air, kemiringan lahan, tanaman penutupan tanah dan intensitas hujan. (3) Proses Terjadinya Aliran Permukaan Menurut Arsyad (2010) proses terjadinya aliran permukaan adalah curah hujan yang jatuh di atas permukaan tanah pada suatu wilayah, pertama hujan akan masuk ke dalam tanah sebagai air infiltrasi. (5) Paving Block dan Grass Block Paving block merupakan produk bahan bangunan yang digunakan sebagai alternatif pengerasan permukaan jalan yang dibuat dari campuran semen, air dan agregat dengan atau tanpa campuran bahan lainnya yang tidak mengurangi mutu bata beton tersebut (Sebayang, 2011). Bentuk paving yang digunakan lainnya adalah paving persegi semi-porous, tri-hexagonal dan segi enam berlubang (hexagonal-hollow)

METODOLOGI
HASIL DAN PEMBAHASAN
KESIMPULAN DAN SARAN
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call