Abstract
The availability of water in a building or building is still difficult to monitor, because the method used still relies on humans. Helps in detecting the volume of water effectively in water reservoirs using ultrasonic hc-sr04 sensors and fuzzy logic. The availability of water in a building or building is monitored when the water in the shelter has run out. This is not good because the availability of water is very necessary and must meet building needs continuously. During this time, monitoring the volume of water storage is done visually. the water is from the top only, so that the information obtained is not accurate. In addition, the container is generally not transparent. So it is difficult to monitor the volume of the water tank. In designing this tool the system is able to work accurately with high input water and the output of tap water using water flow sensors and testing on matlap can determine the fill level seen from the designed rules. The results of the detection of ultrasonic sensors are three led indicator signs, leds blue indicates that the volume of water in the water tank is full, the yellow led member knows that the water tank is partially filled and the red led tells that the volume of water in the water tank has run out and is immediately replenished. From the results of this test, conclusions can be drawn in determining the level status
Highlights
because the method used still relies on humans
the water is from the top
difficult to monitor the volume of the water tank
Summary
Pada tahap ini alat pendeteksi volume air pada tangki air dengan akan ditentukan rule-rule yang akan dipakai lalu menerapkan metode Fuzzy Logic memanfaatkan sensor Defuzzifikasimerupakan tahap akhir dari metode ultrasonic HC-SR04, dengan diterapkannya metode mamdani. Fuzzy Logic ini diharapkan bisa membantu dalam himpunan Fuzzy yang diperoleh dari komposisi aturan memantau dan mengontrol volume air pada tangki air. Pada gambar 1 merupakan gambar dari flowchart logika fuzzy yang akan mempermudah dalam proses pembuatan program. Initialisasi Port yaitu merupakan tahap untuk sudah didapatkan maka ini adalah tahap akhir dari memperkenalkan port-port yang akan digunakan, flowchart program. Metode Logika Fuzzy maka prinsip kerja dari alat serta komponen-komponen dari sistem yang digunakan akan dapat dilihat dengan Untuk hasil pembahasan diambil dari nilai masing – jelas. Dikelurkan melalui kran mengguakan sensor Ultrasonic HC-SR04.Untuk proses menggunakan metode mamdani dengan menghasilkan output untuk menentukan tingkat ketinggian air
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call