Pencil lead graphite electrochemically modified with polyglutamic acid as a sensor for detection of enrofloxacin in aqueous media

Abstract

This study investigates the modification of pencil lead graphite electrodes with polyglutamic acid using an effective and fast static method to develop a sensor for the detection of enrofloxacin (ENR). The successful fabrication of pGA on the electrode surface was confirmed by scanning electron microscopy, energy dispersive X-ray analysis, and Fourier-transform infrared spectroscopy. The conditions of electrochemical modification, including the applied potentials and number of cycles in the potentiostatic process, were systematically investigated to determine their effects on the ENR electrochemical response. The pH of the electrolyte media was also explored to elucidate the electrochemical reaction mechanism of ENR. The developed electrochemical sensor was evaluated using square wave stripping voltammetry for ENR detection. Under optimal conditions, the sensor demonstrated good reproducibility with a relative standard deviation of 4.3% (from five measurements) for ENR signal detection. A linear relationship between ENR concentration and its peak current was observed in the concentration range of 0.1 to 5 μM, with a high correlation coefficient of 0.9988. The limit of detection for ENR using the sensor was 0.12 μM. Our findings provide valuable insights into the design and optimisation of pencil lead graphite electrode-based sensors for ENR detection in aqueous media.