Abstract
Microsensors have been used for the high-resolution particulate matter (PM) monitoring. This study applies PM and health microsensors with the objective of assessing the peak exposure, sources, and immediate health impacts of PM2.5 and PM1 in two Asian countries. Exposure assessment and health evaluation were carried out for 50 subjects in 2018 and 2019 in Bandung, Indonesia and for 55 subjects in 2019 and 2020 in Kaohsiung, Taiwan. Calibrated AS-LUNG sets and medical-certified RootiRx® sensors were used to assess PM and heart-rate variability (HRV), respectively. Overall, the 5-min mean exposure of PM2.5 and PM1 was 30.4 ± 20.0 and 27.0 ± 15.7 µg/m3 in Indonesia and 14.9 ± 11.2 and 13.9 ± 9.8 µg/m3 in Taiwan, respectively. The maximum 5-min peak PM2.5 and PM1 exposures were 473.6 and 154.0 µg/m3 in Indonesia and 467.4 and 217.7 µg/m3 in Taiwan, respectively. Community factories and mosquito coil burning are the two most important exposure sources, resulting in, on average, 4.73 and 5.82 µg/m3 higher PM2.5 exposure increments for Indonesian subjects and 10.1 and 9.82 µg/m3 higher PM2.5 exposure for Taiwanese subjects compared to non-exposure periods, respectively. Moreover, agricultural waste burning and incense burning were another two important exposure sources, but only in Taiwan. Furthermore, 5-min PM2.5 and PM1 exposure had statistically significantly immediate impacts on the HRV indices and heart rates of all subjects in Taiwan and the scooter subjects in Indonesia with generalized additive mixed models. The HRV change for a 10 µg/m3 increase in PM2.5 and PM1 ranged from -0.9% to -2.5% except for ratio of low-high frequency, with greater impacts associated with PM1 than PM2.5 in both countries. This work highlights the ability of microsensors to capture high peaks of PM2.5 and PM1, to identify exposure sources through the integration of activity records, and to assess immediate changes in heart rate variability for a panel of approximately 50 subjects in Indonesia and Taiwan. This study stands out as one of the few to demonstrate the immediate health impacts of peak PM, complementing to the short-term (days or weeks) or long-term effects (months or longer) assessed in most epidemiological studies. The technology/methodology employed offer great potential for researchers in the resource-limited countries with high PM2.5 and PM1 levels.
Published Version (Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Exposure Science & Environmental Epidemiology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.